User's Manual

9
Getting Started
01
1-5-3. Connecting to power
①  Connect the power cable to DC-IN socket of the
device.
②  Plug the car charger adapter end of the power
cable into a 12V DC vehicle power socket.
③ Arrange the wire by using the adhesive cable hold-
ers as shown below.
④ Adjust the camera so that the dash cam is facing
forward and is level with the road.
Before applying the mount, turn on the dash cam and use
the live view on the LCD Screen to adjust the camera angle.
TIP
Preventing Vehicle Battery Discharge
■ Depending on the make and model of your car, the power may be supplied to the dash cam
even with the ignition turned off. This may result in vehicle battery discharge.
■ Some vehicles with multiple power sockets might be equipped with at least 1 outlet that does
not shut off the power with the ignition. Test each power outlet to ensure you connect to an
outlet that shuts off with vehicle ignition.
For more information on the power cable routing instruction, please visit Thinkware homepage.
(www.thinkware.com)
Hide the power cable by placing (tucking)
it in the space between the windshield
and headliner.
Recommended locations for the adhesive
wire clips to arrange the power cable.