Operation Manual

Getting Started

1-5-1. Connecting the Device and the

Mount



①

Place the mount so it is aligned with the connector

(A), and push it toward (B) until it clicks into place.



②

Remove the protective lm from the camera lens.

1-5. Vehicle Installation

1-5-2. Installing the Device

① Clean the area on the windshield where the

dash cam will be installed.

② With dash cam main unit still attached to the

mount, remove the protective tape from the

back of the mount.

③ Attach the adhesive side of the mount on the

windshield where it has unobstructed view

of the road but does not interfere with the

driver’s view.

To ensure that the mount is safely secured, it is recommend-

ed that you separate the device from the mount after instal-

lation and press the mount towards windshield for 5 minutes

to maintain pressure. Allow 24 hours until the adhesive on

the mount has set before connecting the dash cam.

TIP

The camera is located on the right side of the main unit so

install the dash cam on the left side of the center behind

the rearview mirror.

TIP