Operation Manual
7
Getting Started
01
1-5-1. Connecting the Device and the
Mount
①
Align the mount with the connector (A), and slide it
towards (B) until it clicks into place.
②
Remove the protective lm from the camera lens.
1-5. Vehicle Installation
1-5-2. Installing the Device
①
Remove the protective cover from adhesive mount
and attach mount on the windshield where it has
unobstructed view of the road but does not inter-
fere with the driver’s view.
┗
Select the location on the windshield where
buttons are accessible and clean the area before
securing the mount with attached 3M tape
②
To ensure that the mount is safely secured, sepa-
rate the device from the mount after installation.
Press the mount towards the windshield to allow
the adhesive on the mount to set before connect-
ing the dash cam.
┗
Attach the dash cam to the mount once the
mount has been securely attached