Operation Manual
25
PC Viewer Software
04
4-2. PC Viewer Conguration
Memory Partition : Sets how storage space on the memory card will be allotted for each recording mode
Formatting memory card : Initiates memory card format
Voice recording : Sets the voice recording on/o during video recording
Voice Guidance : Sets the voice guidance on/o and the voice guidance volume
Impact Sensitivity : Sets the impact sensitivity
Motion Sensitivity : Sets the sensitivity of the motion detection sensor
Parking Mode :Sets the use of parking surveillance mode when the dash cam is installed using hardwiring
Battery voltage setting for stop recording :
Sets the voltage level for the dash cam to automatically power
down in order to prevent the vehicle battery from draining
Date/Time : Sets the date and time
┗ Get current time : Retrieves the current time from the PC
Time zone : Sets the time zone
Daylight Saving Time (DST): Sets the daylight saving time
Language : Sets the system language for the dash cam (PC Viewer Setting only supports English)
Speed unit : Sets the unit for the vehicle speed
Security LED : Sets the security LED on/o
Version : Version information for the dash cam and its rmware
Save
①
Press Save button to store the new configuration on the MicroSDcard and apply the changed settings
②
Saved configuration is stored in blackbox.cfg file located in MicroSD card under Settings folder
③
Insert the MicroSD card with changed settings to apply the changes to the device
Deleting/Removing blackbox.cfg le using PC le explorer will disable the use of PC Viewer. In such
case, insert the MicroSD card and power on the device which automatically generates blackbox.cfg le
with default settings to enable use of PC Viewer.