User Manual

Settings
41
5.4.3 Resetting the touchscreen (Calibrate Touchscreen)
If the touchscreen accuracy decreases after using the product for an extended period, you can manually
align the touchscreen to make it accurate again. Follow the instructions to reset the touchscreen.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
System Settings, and then tap the
Setting button next to Calibrate Touchscreen.
2
Follow the on-screen instructions to proceed with the screen alignment.
3
A confirmation window will appear when the alignment is complete. Tap the Confirmation button ( )
to apply the alignment. Tap the back button (
) to cancel the alignment.
5.4.4 Adjusting the screen brightness (LCD Brightness)
You can adjust the screen brightness. Follow the instructions to adjust the screen brightness.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
System Settings, and then tap the
Setting button next to LCD Brightness.
2
Switch the button to Mid, Dark, or Bright. The new setting is applied automatically.
5.4.5 Setting the LCD Auto-Off
You can adjust the time until the screen is turned off after operating the product or viewing a recorded
video.FollowtheinstructionstoadjusttheLCDAuto-Offtime.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
System Settings, and then tap the
Setting button next to LCD Auto-Off.
2
Switch the button to 10 min, 30 sec, or OFF. The new setting is applied automatically.
If you set this feature to OFF, the screen will be kept on, and the power consumption of the product will
increase.