User Manual

Settings
37
5.3.1 Setting the safety cameras
When the vehicle approaches or passes the speed limit zone, the safety camera alert system will collect
GPS signals and safety camera data. Refer to the following instructions to enable or disable this feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings, and then tap the
Setting button next to Safety Cameras under Safety Cameras.
2
You can switch the button to ON or OFF to activate or deactivate the feature. The new setting is applied
automatically.
5.3.2 Setting the mobile zone alert
Follow the instructions to turn on or off the mobile zone alert.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings, and then tap the
Setting button next to Mobile Zone Alert under Safety Cameras.
2
Switch the button to ON or OFF to activate or deactivate the feature. The new setting is applied
automatically.
5.3.3 Identifying the vehicle type
Refer to the following instructions to identify your vehicle type for using the ADAS feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings.
2
Tap the Setting button next to Vehicle type under ADAS Features and select Sedan, SUV, or Truck (Bus).
The new setting is applied automatically.
5.3.4 Initializing the ADAS calibration setting (ADAS Settings)
To enhance the ADAS feature's accuracy, follow the instructions to set the alignment on the ADAS settings
screen.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings. Tap the View
button next to ADAS Settings under ADAS Features.
2
Adjust the product position to align the blue line displayed on the ADAS settings screen with the
center of the hood and the green line just above the hood.
After positioning the product, drive at 30 km/h for more than 1 minute to finish the alignment.