User Manual

Settings
35
5.2.5 Setting the motion detection sensitivity (motion sensitivity)
The Motion detection feature records a video when a moving object is detected near your vehicle. Refer to
the following instructions to set the motion detection sensitivity.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Rec. Settings and then tap the Setting
button next to Motion Sensitivity.
2
Switch the button to Lowest, Low, Mid, High, or highest. The new setting is applied automatically.
5.2.6 Setting the record timer feature (Off Timer)
When you set activate the record timer feature, the product will record a video in parking mode for a preset
time. Refer to the following instructions to set the time.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Rec. Settings and then tap the button
next to Off Timer.
2
Switch the button to 3 Hrs., 6 Hrs., 12 Hrs., 24 Hrs., 48 Hrs., or OFF. The new setting is applied
automatically.
The vehicle battery will not be charged while the vehicle is parked. If you record in parking mode for an
extended period, the vehicle’s battery may be depleted and you may not be able to start the vehicle.
5.2.7 Setting the battery protection feature (battery protection)
When the vehicle battery is consumed to a certain level, this feature stops recording to prevent battery
depletion.RefertothefollowinginstructionstosettheLowVoltageOfffeature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Rec. Settings and then tap the button
next to Battery Protection.
2
Switch the button to ON or OFF to activate or deactivate the feature. If you have switched the button to
OFF, the caution message will appear. Tap OK on the screen to deactivate the feature. The new setting
is applied automatically.