User Manual

Settings
34
5.2.2 Setting parking mode
You can set the operating mode of the product while the vehicle is parked. Follow the instructions to set
parking mode.
To use parking mode, you must install the hardwiring cable. If continuous power is not supplied to the
product, the product will stop recording when the vehicle engine is turned off.
For more information about parking mode, refer to "3.6 Using parking mode"
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Rec. Settings and then tap the Setting
button next to Parking Mode.
2
Select Motion detection, Time Lapse, or OFF, and then tap the Confirmation button ( ).
3
Tap the Confirmation button ( ) on the confirmation screen. The new setting is applied automatically.
5.2.3 Setting the Super Night Vision feature
You can record bright and high resolution videos while parking at night if you activate the Super Night
Vision feature. Follow the instructions to select a recording mode to use the Super Night Vision feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Rec. Settings, and then tap the Setting
button next to Super Night Vision.
2
Switch the button to ON or OFF to activate or deactivate the feature. The new setting is applied
automatically.
5.2.4 Setting the parking impact sensitivity (parking sensitivity)
You can set the detection sensitivity for recording when impact is detected while parking. Refer to the
following instructions to set the parking impact sensitivity.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Rec. Settings and then tap the Setting
button next to Parking Sensitivity.
2
Switch the button to Lowest, Low, Mid, High, or Highest. The new setting is applied automatically.