User Manual

33
5. Settings
You can set the product features according to your needs and preferences.
5.1 Setting the camera
You can adjust the brightness of the front and rear view.
5.1.1 Setting the brightness of the camera (brightness camera)
You can set the brightness of the front view recording. Refer to the following instructions to set the
brightness.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Camera Settings, and then tap the
Setting button next to Brightness-Front.
2
Switch the button to Mid, Dark, or Bright. The new setting is applied automatically.
5.2 Setting recording features
You can set and adjust various features for recording, including the detection sensitivity for recording when
the product detects an impact during continuous recording.
5.2.1 Setting the continuous impact detection sensitivity (cont. sensitivity)
You can set the detection sensitivity for recording when an impact is detected while driving. When you set
the sensitivity, you must consider the road conditions, traffic situation, or your driving style.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Rec. Settings and then tap the Setting
button next to Cont. sensitivity.
2
Switch the button to OFF, Lowest, LOW, MID, or High. The new setting is applied automatically.
•If the continuous impact detection sensitivity is too high, the product will record a video even when a
minor impact caused by the road condition and your driving is detected. This may shorten the memory
card’s life.
•If the continuous impact detection sensitivity is too low, the product may not record a video when a minor
accident occurs.