User Manual

Using Advanced Driver Assistance Systems (ADAS)
30
4.1 The safety camera alert system (optional external GPS module or the
THINKWARE Connected Dongle required)
When the vehicle approaches or passes the speed limit zone, the safety camera alert system collects GPS
signals and safety camera data. This system also provides road information about bus only lane, parking
ticket trap zones, and overloading enforcement zone in real time to assist you while driving.
If the vehicle exceeds the speed limit or gets close to
the speed limit zone, the speed limit will be displayed
on the screen.
To deactivate the safety camera alert system, tap the Home button (
)ontheLiveviewscreen
>
Settings
>
Road Safety Settings, and then tap the Setting button next to Safety Camera Alert to switch to OFF.
This feature may not be available in some countries.
4.2 The lane departure warning system (LDWS)
Whenthevehicledepartsitslane,theLDWSdetectsthelanedepartureviathereal-timevideoimageand
warns the driver.
The departed lane is displayed in red.
The lane guide lines are displayed on the screen when
youactivatetheLDWS.
The voice guide warns you and a left or right lane
guide line will display in red when the vehicle enters
either lane.
The on-screen lane guide lines cannot be aligned. The guide lines may not perfectly match the actual lanes
due to the product installation angle, position, or winding roads.