User Manual
Table Of Contents
- Safety information
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Using Advanced Driver Assistance Systems (ADAS)
- 5. Settings
- 5.1 Setting the camera
- 5.2 Setting recording features
- 5.2.1 Setting the continuous impact detection sensitivity (cont. sensitivity)
- 5.2.2 Setting parking mode
- 5.2.3 Setting the Super Night Vision feature
- 5.2.4 Setting the parking impact sensitivity (parking sensitivity)
- 5.2.5 Setting the motion detection sensitivity (motion sensitivity)
- 5.2.6 Setting the record timer feature (Off Timer)
- 5.2.7 Setting the battery protection feature (battery protection)
- 5.2.8 Setting the battery cutoff voltage feature (Off voltage)
- 5.2.9 Setting the battery protection feature for wintertime (Wt Bty Protection)
- 5.3 Setting Road Safety Settings (ADAS)
- 5.3.1 Setting the safety cameras
- 5.3.2 Setting the mobile zone alert
- 5.3.3 Identifying the vehicle type
- 5.3.4 Initializing the ADAS calibration setting (ADAS Settings)
- 5.3.5 Initializing ADAS calibration
- 5.3.6 Setting the lane departure warning feature (LDWS)
- 5.3.7 Setting the lane departure detection speed (LDWS speed)
- 5.3.8 Setting the forward collision detection sensitivity (FCWS)
- 5.3.9 Setting the low speed forward collision detection sensitivity (Low Speed FCWS)
- 5.3.10 Setting front vehicle departure warning (FVDW)
- 5.3.11 Setting the ADAS Volume
- 5.4 Configuring the system settings
- 5.4.1 Setting the display language
- 5.4.2 Adjusting the system volume
- 5.4.3 Resetting the touchscreen (Calibrate Touchscreen)
- 5.4.4 Adjusting the screen brightness (LCD Brightness)
- 5.4.5 Setting the LCD Auto-Off
- 5.4.6 Setting the security LED
- 5.4.7 Setting the time zone
- 5.4.8 Setting the date (Set Date)
- 5.4.9 Setting the time (Set Time)
- 5.4.10 Setting the daylight saving time
- 5.4.11 Setting the speed unit
- 5.4.12 Setting the speed stamp
- 5.4.13 Partitioning the memory card
- 5.4.14 Formatting the memory card
- 5.4.15 Configuring the video overwriting function
- 5.4.16 Initializing the system settings (Reset Settings)
- 6. Accessing the product information
- 7. Upgrading the firmware
- 8. Using the PC viewer
- 9. Troubleshooting
- 10. Specifications
Settings
37
5.3.5 Initializing ADAS calibration
You can initialize the ADAS calibration screen. Follow the instructions to initialize ADAS calibration.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings, and then tap the
button next to Initialize ADAS under ADAS Features.
2
When the confirmation window appears, tap the confirmation button ( ). The ADAS calibration
settings will be initialized.
5.3.6 Setting the lane departure warning feature (LDWS)
Whenthevehicledepartsitslane,theLDWSwilldetectthelanedepartureviathereal-timevideoimage
and warn the driver. Refer to the following instructions to set the detection sensitivity or activate or
deactivate this feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings, and then tap the
button next to LDWS (Lane Departure Warning) under ADAS Features.
2
Switch the button to Low, Mid, or High to set the detection sensitivity, or OFF to deactivate the feature.
The new setting is applied to the system as soon as a change is made.
5.3.7 Setting the lane departure detection speed (LDWS speed)
You can change the lane departure detection speed. Refer to the following instructions to set the lane
departure detection speed.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings, and then tap the
button next to LDWS speed under ADAS Features.
2
Switch the button to 50km(30mph), 60km(40mph), 70km(50mph), or 80km(65mph). The new setting is
applied to the system as soon as a change is made.