User Manual
Table Of Contents
- Safety information
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Using Advanced Driver Assistance Systems (ADAS)
- 5. Settings
- 5.1 Setting the camera
- 5.2 Setting recording features
- 5.2.1 Setting the continuous impact detection sensitivity (cont. sensitivity)
- 5.2.2 Setting parking mode
- 5.2.3 Setting the Super Night Vision feature
- 5.2.4 Setting the parking impact sensitivity (parking sensitivity)
- 5.2.5 Setting the motion detection sensitivity (motion sensitivity)
- 5.2.6 Setting the record timer feature (Off Timer)
- 5.2.7 Setting the battery protection feature (battery protection)
- 5.2.8 Setting the battery cutoff voltage feature (Off voltage)
- 5.2.9 Setting the battery protection feature for wintertime (Wt Bty Protection)
- 5.3 Setting Road Safety Settings (ADAS)
- 5.3.1 Setting the safety cameras
- 5.3.2 Setting the mobile zone alert
- 5.3.3 Identifying the vehicle type
- 5.3.4 Initializing the ADAS calibration setting (ADAS Settings)
- 5.3.5 Initializing ADAS calibration
- 5.3.6 Setting the lane departure warning feature (LDWS)
- 5.3.7 Setting the lane departure detection speed (LDWS speed)
- 5.3.8 Setting the forward collision detection sensitivity (FCWS)
- 5.3.9 Setting the low speed forward collision detection sensitivity (Low Speed FCWS)
- 5.3.10 Setting front vehicle departure warning (FVDW)
- 5.3.11 Setting the ADAS Volume
- 5.4 Configuring the system settings
- 5.4.1 Setting the display language
- 5.4.2 Adjusting the system volume
- 5.4.3 Resetting the touchscreen (Calibrate Touchscreen)
- 5.4.4 Adjusting the screen brightness (LCD Brightness)
- 5.4.5 Setting the LCD Auto-Off
- 5.4.6 Setting the security LED
- 5.4.7 Setting the time zone
- 5.4.8 Setting the date (Set Date)
- 5.4.9 Setting the time (Set Time)
- 5.4.10 Setting the daylight saving time
- 5.4.11 Setting the speed unit
- 5.4.12 Setting the speed stamp
- 5.4.13 Partitioning the memory card
- 5.4.14 Formatting the memory card
- 5.4.15 Configuring the video overwriting function
- 5.4.16 Initializing the system settings (Reset Settings)
- 6. Accessing the product information
- 7. Upgrading the firmware
- 8. Using the PC viewer
- 9. Troubleshooting
- 10. Specifications
Settings
36
5.3.1 Setting the safety cameras
When the vehicle approaches or passes the speed limit zone, the safety camera alert system will collect
GPS signals and safety camera data. Refer to the following instructions to enable or disable this feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings, and then tap the
Setting button next to Safety Cameras under Safety Cameras.
2
You can switch the button to ON or OFF to activate or deactivate the feature. The new setting is applied
to the system as soon as a change is made.
5.3.2 Setting the mobile zone alert
Follow the instructions to turn on or off the mobile zone alert.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings, and then tap the
Setting button next to Mobile Zone Alert under Safety Cameras.
2
Switch the button to ON or OFF to activate or deactivate the feature. The new setting is applied to the
system as soon as a change is made.
5.3.3 Identifying the vehicle type
Refer to the following instructions to identify your vehicle type for using the ADAS feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings.
2
Tap the Setting button next to Vehicle type under ADAS Features and select Sedan, SUV, or Truck (Bus).
The new setting is applied to the system as soon as a change is made.
5.3.4 Initializing the ADAS calibration setting (ADAS Settings)
To enhance the ADAS feature's accuracy, follow the instructions to set the alignment on the ADAS settings
screen.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings. Tap the View
button next to ADAS Settings under ADAS Features.
2
Adjust the product position to align the blue line displayed on the ADAS settings screen with the
center of the hood and the green line just above the hood.
After positioning the product, drive at 30 km/h for more than 1 minute to finish the alignment.