User Manual
Table Of Contents
- Safety information
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Using Advanced Driver Assistance Systems (ADAS)
- 5. Settings
- 5.1 Setting the camera
- 5.2 Setting recording features
- 5.2.1 Setting the continuous impact detection sensitivity (cont. sensitivity)
- 5.2.2 Setting parking mode
- 5.2.3 Setting the Super Night Vision feature
- 5.2.4 Setting the parking impact sensitivity (parking sensitivity)
- 5.2.5 Setting the motion detection sensitivity (motion sensitivity)
- 5.2.6 Setting the record timer feature (Off Timer)
- 5.2.7 Setting the battery protection feature (battery protection)
- 5.2.8 Setting the battery cutoff voltage feature (Off voltage)
- 5.2.9 Setting the battery protection feature for wintertime (Wt Bty Protection)
- 5.3 Setting Road Safety Settings (ADAS)
- 5.3.1 Setting the safety cameras
- 5.3.2 Setting the mobile zone alert
- 5.3.3 Identifying the vehicle type
- 5.3.4 Initializing the ADAS calibration setting (ADAS Settings)
- 5.3.5 Initializing ADAS calibration
- 5.3.6 Setting the lane departure warning feature (LDWS)
- 5.3.7 Setting the lane departure detection speed (LDWS speed)
- 5.3.8 Setting the forward collision detection sensitivity (FCWS)
- 5.3.9 Setting the low speed forward collision detection sensitivity (Low Speed FCWS)
- 5.3.10 Setting front vehicle departure warning (FVDW)
- 5.3.11 Setting the ADAS Volume
- 5.4 Configuring the system settings
- 5.4.1 Setting the display language
- 5.4.2 Adjusting the system volume
- 5.4.3 Resetting the touchscreen (Calibrate Touchscreen)
- 5.4.4 Adjusting the screen brightness (LCD Brightness)
- 5.4.5 Setting the LCD Auto-Off
- 5.4.6 Setting the security LED
- 5.4.7 Setting the time zone
- 5.4.8 Setting the date (Set Date)
- 5.4.9 Setting the time (Set Time)
- 5.4.10 Setting the daylight saving time
- 5.4.11 Setting the speed unit
- 5.4.12 Setting the speed stamp
- 5.4.13 Partitioning the memory card
- 5.4.14 Formatting the memory card
- 5.4.15 Configuring the video overwriting function
- 5.4.16 Initializing the system settings (Reset Settings)
- 6. Accessing the product information
- 7. Upgrading the firmware
- 8. Using the PC viewer
- 9. Troubleshooting
- 10. Specifications
Using Advanced Driver Assistance Systems (ADAS)
30
Lane departure warning methods
If the external GPS module is installed, an alarm will sound when the turn signals are not turned on and the
vehicle leaves its lane at a GPS speed over 50 km/h.
Setting the LDWS
• TodeactivatetheLDWS,taptheHomebutton( )ontheLiveviewscreen
>
Settings
>
Road Safety
Settings, and then tap the Setting button next to LDWS (Lane Departure Warning) to switch to OFF. To set
the warning sensitivity, select a sensitivity option (Low / Mid / High).
• ToalignthelaneguidelinesoftheLDWS,taptheHomemenubutton(
)ontheLiveviewscreen
>
Settings
>
Road Safety Settings, and then tap the Reset button next to Initialize LDWS under ADAS
Features.
• To change the lane departure detection speed, tap the Home button (
)ontheLiveviewscreen
>
Settings
>
Road safety settings, and then tap the button next to LDWS speed under ADAS Features to
switch the speed (50/60/80/100 km, 30/40/50/65 Mph).
If the vehicle is driving on a snow-covered road, in the rain at night, or on a damaged road, the LDWS may
not work as it does under normal conditions.
4.3 The forward collision warning system (FCWS)
Whenthevehicledrivesat40km/horabove,theFCWSwilldetectforwardcollisiondangerviathereal-
time video image and warn the driver.
Preliminary forward collision warning: Displayed when
a preliminary collision hazard is detected.
Secondary forward collision warning: Displayed
when the distance to the vehicle ahead decreases
after a preliminary collision warning.
To deactivate the FCWS or change the warning sensitivity, tap the Home button ( )ontheLiveview
screen
>
Settings
>
Road Safety Settings, and then tap the button next to FCWS (Forward Collision Warning)
to switch the sensitivity option (Low / Mid / High) or OFF to turn off the warning.