User Manual
Table Of Contents
- Safety information
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Using Advanced Driver Assistance Systems (ADAS)
- 5. Settings
- 5.1 Setting the camera
- 5.2 Setting recording features
- 5.2.1 Setting the continuous impact detection sensitivity (cont. sensitivity)
- 5.2.2 Setting parking mode
- 5.2.3 Setting the Super Night Vision feature
- 5.2.4 Setting the parking impact sensitivity (parking sensitivity)
- 5.2.5 Setting the motion detection sensitivity (motion sensitivity)
- 5.2.6 Setting the record timer feature (Off Timer)
- 5.2.7 Setting the battery protection feature (battery protection)
- 5.2.8 Setting the battery cutoff voltage feature (Off voltage)
- 5.2.9 Setting the battery protection feature for wintertime (Wt Bty Protection)
- 5.3 Setting Road Safety Settings (ADAS)
- 5.3.1 Setting the safety cameras
- 5.3.2 Setting the mobile zone alert
- 5.3.3 Identifying the vehicle type
- 5.3.4 Initializing the ADAS calibration setting (ADAS Settings)
- 5.3.5 Initializing ADAS calibration
- 5.3.6 Setting the lane departure warning feature (LDWS)
- 5.3.7 Setting the lane departure detection speed (LDWS speed)
- 5.3.8 Setting the forward collision detection sensitivity (FCWS)
- 5.3.9 Setting the low speed forward collision detection sensitivity (Low Speed FCWS)
- 5.3.10 Setting front vehicle departure warning (FVDW)
- 5.3.11 Setting the ADAS Volume
- 5.4 Configuring the system settings
- 5.4.1 Setting the display language
- 5.4.2 Adjusting the system volume
- 5.4.3 Resetting the touchscreen (Calibrate Touchscreen)
- 5.4.4 Adjusting the screen brightness (LCD Brightness)
- 5.4.5 Setting the LCD Auto-Off
- 5.4.6 Setting the security LED
- 5.4.7 Setting the time zone
- 5.4.8 Setting the date (Set Date)
- 5.4.9 Setting the time (Set Time)
- 5.4.10 Setting the daylight saving time
- 5.4.11 Setting the speed unit
- 5.4.12 Setting the speed stamp
- 5.4.13 Partitioning the memory card
- 5.4.14 Formatting the memory card
- 5.4.15 Configuring the video overwriting function
- 5.4.16 Initializing the system settings (Reset Settings)
- 6. Accessing the product information
- 7. Upgrading the firmware
- 8. Using the PC viewer
- 9. Troubleshooting
- 10. Specifications
Using recording features
23
3.8 About the screen layout
ThefollowingsarelayoutdescriptionsoftheLiveviewandHomescreens.
3.8.1 Live view screen
OntheLiveviewscreen,youcanviewthecurrentlyrecordedvideoandoperatetheproductbytappingon
theLCDdisplay.Whenyouturnonelectricalaccessoriesandstarttheengine,theLiveviewscreenwillbe
displayed.
If the LCD Auto-Off setting is set to OFF, the screen will be kept on, and the power consumption of the
product will increase.
Move to the Home screen.
Displays the video
that the rear camera
(optional) is recording.
Displays the video
that the front camera
is recording. Tap the
screen to hide or display
the Menu buttons.
Displays the current date and time.
Displays the current
recording status.
Turn on or off the voice
guidance.
Activate or deactivate the
voice recording feature.
Start manual recording.
Displays the current driving speed when
the external GPS module (optional).
Displays the current vehicle voltage. Displays the GPS icon when the external
GPS module (optional) is installed.
YoucanopenthetouchaccuracyresettingwindowbytappingtheLiveviewscreen10times.Resetthe
touchscreenaccuracythroughthetouchaccuracyresettingwindow.Formoreinformation,referto"5.4.3
Resetting the touchscreen (Calibrate Touchscreen)".
Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).