User's Manual
Table Of Contents
- Safety information
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Using the mobile viewer
- 5. Using the PC viewer
- 6. Settings
- 6.1 Managing the memory card
- 6.2 Setting the camera
- 6.3 Setting recording features
- 6.3.1 Setting the continuous impact detection sensitivity
- 6.3.2 Setting parking mode
- 6.3.3 Setting the impact sensitivity in parking mode
- 6.3.4 Setting the motion detection sensitivity
- 6.3.5 Setting the record timer feature
- 6.3.6 Setting the battery protection feature
- 6.3.7 Setting the battery cutoff voltage feature
- 6.3.8 Setting the battery protection feature for wintertime
- 6.4 Setting road safety features
- 6.5 Configuring the system settings
- 7. Accessing the product information
- 8. Upgrading the firmware
- 9. Troubleshooting
- 10. Specifications
Settings
41
6.5.5 Setting the daylight saving time
Follow the instructions to set the daylight saving time.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Daylight Saving, select Enabled or Disabled. The new setting is applied automatically.
6.5.6 Setting the speed unit
Follow the instructions to set the speed unit.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Speed Unit, select km/h or mph.
6.5.7 Setting the speed stamp
Follow the instructions to turn on or off the speed stamp feature.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Speed Stamp, select Enabled or Disabled. The new setting is applied automatically.