User's Manual
Table Of Contents
- Safety information
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Using the mobile viewer
- 5. Using the PC viewer
- 6. Settings
- 6.1 Managing the memory card
- 6.2 Setting the camera
- 6.3 Setting recording features
- 6.3.1 Setting the continuous impact detection sensitivity
- 6.3.2 Setting parking mode
- 6.3.3 Setting the impact sensitivity in parking mode
- 6.3.4 Setting the motion detection sensitivity
- 6.3.5 Setting the record timer feature
- 6.3.6 Setting the battery protection feature
- 6.3.7 Setting the battery cutoff voltage feature
- 6.3.8 Setting the battery protection feature for wintertime
- 6.4 Setting road safety features
- 6.5 Configuring the system settings
- 7. Accessing the product information
- 8. Upgrading the firmware
- 9. Troubleshooting
- 10. Specifications
Settings
40
6.5.2 Adjusting the system volume
This menu allows you to adjust the voice guidance volume. Follow the instructions to adjust the volume.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Volume, select 0, 1, 2, or 3. The new setting is applied automatically.
If you select 0, the voice guidance will be disabled.
6.5.3 Setting the time zone
Follow the instructions to set the time zone.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Time Zone, select the desired time zone. The new setting is applied automatically.
6.5.4 Synchronizing the date and time with your mobile
You can synchronize the date and time of your mobile with the dashcam. Follow the instructions to
synchronize the date and time with your mobile.
1
From the mobile viewer, tap Dash Cam Settings and tap the Synchronize with mobile button under
Date / Time.
2
From Date / Time Settings, tap OK to proceed with synchronizing the date and time with your mobile.
The date and time settings on your mobile will be applied to the dashcam. Tap Cancel to cancel
synchronization with your mobile.
You can also set the date and time of the dashcam on the PC viewer. To set the date and time, click Settings
> Dash Cam Settings > System Settings, and set the date and time in the Date / Time field. To apply the
current time of your PC, click Get Current Time.