Operation Manual

Getting Started

1-5-1. Connecting the Device and the

Mount

Insert the mounting connector of the dash cam

between the connector brackets of the mount.

Use the screw to attach the dash cam to the mount.

Remove the protective lm from the camera lens.

1-5. Vehicle Installation

1-5-2. Installing the Device

Remove the protective cover from adhesive mount

and attach mount on the windshield where it has

unobstructed view of the road but does not inter-

fere with the driver’s view.

Select the location on the windshield where

buttons are accessible and clean the area before

securing the mount with attached 3M tape

To ensure that the mount is safely secured, sepa rate

the device from the mount after installation. Press

the mount towards the windshield to allow the ad-

hesive on the mount to set before connecting the

dash cam.

Attach the dash cam to the mount once the

mount has been securely attached

The camera is located on the left side of the main unit

so install the dash cam on the right of center behind the

rearview mirror.

TIP