Operation Manual

Getting Started

TIP

1-5-1. Connecting the Device and the

Mount

①

Place the mount so it is aligned with the connector

(A), and push it toward (B) until it clicks into place.

②

Remove the protective lm from the camera lens.

1-5-2. Installing the Device

①

Clean the area on the windshield where the dash

cam will be installed.

②

With dash cam main unit still attached to the

mount, remove the protective tape from the back

of the mount.

③

Attach the adhesive side of the mount on the wind-

shield where it has unobstructed view of the road

but does not interfere with the driver’s view.

1-5. Vehicle Installation

To ensure that the mount is safely secured, it is recommend-

ed that you separate the device from the mount after instal-

lation and press the mount towards windshield for 5 min-

utes to maintain pressure. Allow 24 hours until the adhesive

on the mount has set before connecting the dash cam.

TIP

The camera is located on the left side of the main unit so in-

stall the dash cam on the right side of the center behind the

rearview mirror.