Operation Manual

6
1-4. Inserting a Memory Card
1-4-1. About Memory Cards
 Class 6 or higher microSD card must be used with a storage capacity of 8GB or 16GB.
It is strongly recommended that minimum 8GB memory card is used for HD recording.
 The microSD card should be formatted every 2 weeks to maximize the lifetime of the memory card.
1-4-2. Installing a microSD Card
Do not apply excessive force on the MicroSD card or attempt to insert it in the wrong direction as it may
cause damage the MicroSD card and the card slot.
micro SD
Open the slot cover and insert the MicroSD card
into the slot with the metal contacts facing up
toward the mount connector and push until it
locks into place.
Press the end of MicroSD card until it clicks out
from the slot. Pull out the MicroSD card and
close the slot cover.
Inserting the
memory card
Removing the
memory card
MicroSD card
The microSD card should be tested for errors on a regular basis and as the memory card is a consumable
item, it will need to be replaced periodically.
THINKWARE shall NOT be responsible for any problems and/or damages that may occur from not using
genuine or authorized parts and accessories. It is strongly recommended that THINKWARE memory card
is used to minimize memory card error.
Turn the device o completely before removing the microSD card to avoid damages to the memory card.
To prevent loss of important data, frequently copy recorded video from microSD card to another storage
device such as personal computer for back up.
Cautions