User's Manual Part 2

ManualsBrandsThinkware ManualsVehicleF770

Cautions

 Briey press the Voice Recording ( ) button to turn the audio recording on or o.

2-10. Audio Recording

Users do not reserve the right to use the product for purposes other than as specied in this user guide.

According to the Personal Information Protection Act and other related regulations, the user/owner may

be held liable if the video and/or conversation recorded by the device are distributed without their

consent. Thus, special attention should be paid in using this product.

 Press and hold the FORMAT button for 3 seconds to initiate memory card format.

2-11. Formatting MicroSD Card

Press Briey

Summary of content (10 pages)

PAGE 1
2-10. Audio Recording  Briefly press the Voice Recording ( ) button to turn the audio recording on or off. Press Briefly Cautions sers do not reserve the right to use the product for purposes other than as specified in this user guide. U According to the Personal Information Protection Act and other related regulations, the user/owner may be held liable if the video and/or conversation recorded by the device are distributed without their consent.
PAGE 2
02 Basics 2-12. Initializing Device Settings  Press and hold REC and FORMAT buttons simultaneously to reset the device settings to default factory settings. 2-13. Upgrading Firmware  The system will automatically be updated if the MicroSD card contains the firmware upgrade file. The device restarts automatically after the upgrade has been completed.  Make sure your device is always up to date with latest firmware. Please check back frequently at THINKWARE website (www.thinkware.
PAGE 3
. Mobile Viewer Application 3-1. Thinkware Dash Cam Mobile Viewer Thinkware Dash Cam Mobile Viewer App is available through Google Play and the App Store from iTunes.  Mobile App device OS version requirements: Android 4.0 (Ice Cream Sandwich) or higher, iOS 7.0 or higher.  You may disable Cellular data (Data networks) for using apps in some of devices operating Lollipop.  For iOS devices, Wi-Fi settings can only be accessed using the smartphone or tablet settings. 3-1-1.
PAGE 4
03 Mobile Application  Connecting with WPS ( Only Android OS) ①D ownload and install Thinkware Dash Cam Mobile Viewer application. ② P ress and hold Wi-Fi ( mode. ) button for more than 5 seconds on the dash cam to enter WPS connection ③ S elect "WPS" button on the Thinkware Dash Cam Mobile Viewer application to automatically connect to the Thinkware dash cam using Wi-Fi. (takes approximately 20~30 seconds) : Retry Wi-Fi search.
PAGE 5
3-2. Thinkware Dash Cam Mobile Viewer Main Menu Following section describing the Thinkware Dash Cam Mobile Viewer menu is based on Android devices. Layouts and screen captures might be slightly different for iOS devices. 3-2-1. Live View  Live View : When using Live View, the continuous recording will be disabled.
PAGE 6
03 Mobile Application 3-2-2.
PAGE 7
 Video download Front view videos Rear view videos Cautions For Android OS devices, it may take a while until downloaded videos are displayed in the list.
PAGE 8
03 Mobile Application 3-2-3. Memory Settings  Memory Card Settings Memory Partition Setting : Sets how storage space on the memory card will be allotted for each recording mode (Entire memory card will be formatted when the memory partition setting is changed) Memory card format : Formats the MicroSD card. Formatting will completely erase all video files stored in the memory card ※ It is recommended that you back up data before formatting the memory card.
PAGE 9
3-2-4. Settings > Dashcam Setting  Camera Settings Brightness-F/R : Sets the video recording brightness for front/rear camera Wide Dynamic Range : Sets the WDR mode to record clear video even in extreme contrast/ back-lit environment.  Record Settings Cont. sensitivity : Sets the impact sensitivity during continuous recording mode. It is recommended that you set the sensitivity according to vehicle type.
PAGE 10
03 Mobile Application  Road Safety Warning System Settings Safety Camera Alert : Sets the audible notifications for road safety warnings Vehicle type : Sets the vehicle type to be used to optimize Advanced Driver Assistance System (ADAS) features such as Lane Departure Warning System (LDWS) and Forward Collision Warning System (FCWS). LDWS (Lane Departure Warning) : Sets the LDWS driver assistance notification.