User's Manual Part 1

Getting Started

1-4-2. Installing a MicroSD Card

Do not apply excessive force on the MicroSD card or attempt to insert it in the wrong direction as it may

cause damage to the MicroSD card and the card slot.

The MicroSD card should be tested for errors on a regular basis and as the memory card is a consumable

item, it should be replaced periodically.

THINKWARE shall NOT be responsible for any problems and/or damages that may occur from not using

genuine or authorized parts and accessories. It is strongly recommended that THINKWARE memory cards

are used to minimize memory card error.

Ensure that the device is completely o before removing the MicroSD card to avoid damages to the

memory card.

To prevent loss of important data, frequently copy recorded videos from MicroSD card to another storage

device such as personal computer for back up.

Cautions

Inserting the memory card

MicroSD card

1-4. Inserting a Memory Card

1-4-1. About Memory Cards

 UHS MicroSD card must be used with a storage capacity of 16GB, 32GB, or 64GB.

It is strongly recommended that minimum 16GB memory card is used for full HD recording.

 The MicroSD card should be formatted every 2 weeks to maximize the lifetime of the memory card.

Front Back

MicroSD Memory Card

Gently apply force on the MicroSD

card until it is ejected from the slot.

Insert the MicroSD card into the slot with

the metal contacts facing the back of the

device, and push it until locks into the

place.

Removing the memory card