User's Manual

7
Getting Started
01
1-4-2. Installing a MicroSD Card
Do not apply excessive force on the MicroSD card or attempt to insert it in the wrong direction as it may
cause damage to the MicroSD card and the card slot.
The MicroSD card should be tested for errors on a regular basis and as the memory card is a consumable
item, it should be replaced periodically.
THINKWARE is NOT responsible for any problems and/or damages that may occur from not using genu-
ine or authorized parts and accessories. It is strongly recommended that THINKWARE memory cards are
used to minimize memory card error.
Ensure that the device is completely o before removing the MicroSD card to avoid damages to the
memory card.
To prevent loss of important data, frequently copy recorded video from MicroSD card to another storage
device such as personal computer for back up.
Cautions
MIC
micro SD
Inserting the memory card
Open the slot cover and insert the MicroSD card into
the slot with the metal contacts facing up toward the
mount connector and push until it locks into place.
Removing the memory card
Press the end of MicroSD card until it
clicks out from the slot. Pull out the
MicroSD card and close the slot cover.
MicroSD card
1-4. Inserting a Memory Card
1-4-1. About Memory Cards
X UHS MicroSD card must be used with a storage capacity of 16GB, 32GB, or 64GB.
It is strongly recommended that minimum 16GB memory card is used for full HD recording.
X The MicroSD card should be formatted every 2 weeks to maximize the lifetime of the memory card.