Operation Manual
26
3-1-5. Dashcam Settings
Camera Settings
Front/Rear Camera Resolution :
Sets the video recording resolution for front/rear camera
Front/Rear Camera brightness :
Sets the video recordingbrightness for front/rear camera
Wide Dynamic Range :
Sets the WDR mode to record clear videos under large variation of-
backlightingillumination
Record Settings
Continuous recording impact sensitivity :
Sets the impact sensitivity during continuous recording mode. It is
recommended that you set the sensitivity according to vehicle type.
High sensitivity setting is recommended for cars with softer ride such
as luxury sedans; while low sensitivity setting is recommendedfor cars
such as performance cars, trucks, or SUVs which tends to have stier
suspension settings.
Parking mode :
Monitors vehicle ignition status to automatically convert to parking
mode when the vehicle engine is turned o. The dash cam must be
hardwired to the vehicle for the use of parking mode.
Parking mode impact sensitivity :
Sets the impact sensitivity during parking mode
Motion detection sensitivity :
Sets the motion detection sensitivity during parking mode
Sensitivity :
Sets the impact sensitivity level in parking mode.
Device auto-o timer :
Sets the timer for the dash cam to automatically shut down in parking mode to prevent fromdraining the
vehicle battery
Device auto-o voltage :
Sets the voltage level for the dash cam to automatically shut down if the dash cam detects voltage level
lower than congured value for more than 5 minutes in order to prevent fromdraining the vehicle battery