Operation Manual

1-4-2. Installing a microSD Card

Do not apply excessive force on the MicroSD card or attempt to insert it in the wrong direction as it may

cause damage the MicroSD card and the card slot.

The microSD card should be tested for errors on a regular basis and as the memory card is a consumable

item, it will need to be replaced periodically.

THINKWARE shall NOT be responsible for any problems and/or damages that may occur from not using

genuine or authorized parts and accessories. It is strongly recommended that THINKWARE memory card

is used to minimize memory card error.

Turn the device o completely before removing the microSD card to avoid damages to the memory card.

To prevent loss of important data, frequently copy recorded video from microSD card to another storage

device such as personal computer for back up.

Cautions

MIC

micro SD

Inserting the memory card

Open the slot cover and insert the MicroSD card into

the slot with the metal contacts facing up toward the

mount connector and push until it locks into place.

Removing the memory card

Press the end of MicroSD card until it

clicks out from the slot. Pull out the

MicroSD card and close the slot cover.

MicroSD card

1-4. Inserting a Memory Card

1-4-1. About Memory Cards

 Class 10 microSD card must be used with a storage capacity of 8GB, 16GB, or 32GB. It is strongly recom-

mended that minimum 16GB memory card is used for full HD recording.

 The microSD card should be formatted every 2 weeks to maximize the lifetime of the memory card.