Installation Guide

 Note

1. The adhesive tape mount is not permanent. To easily remove the mount, briey

apply heat to the base of the adhesive mount with a hairdryer, then use a dental

oss to remove the tape from the windshield.

2. Some vehicles may use a 12V power outlet that stays powered with the engine

o. If the dashboard camera stays plugged in, battery drainage may occur. Please

consult the vehicle manufacturer to see if your vehicle uses such power outlets.

3. Windshield mounting regulations may dier for each state and municipality.

Please consult local bylaws before using this product.

Quick Mounting Guide

Dash Cam

What you’ll need: / Articles requis:

Mount with 3M tape

PAGE 1
Quick Mounting Guide What you’ll need: / Articles requis: Dash Cam Mount with 3M tape  Note 1. The adhesive tape mount is not permanent. To easily remove the mount, briefly apply heat to the base of the adhesive mount with a hairdryer, then use a dental floss to remove the tape from the windshield. 2. Some vehicles may use a 12V power outlet that stays powered with the engine off. If the dashboard camera stays plugged in, battery drainage may occur.
PAGE 2
PLEASE DO NOT RETURN TO STORE. If you experience any difficulties operating this product, please contact us at 1 (844) 865-9273 (toll free) OR support@thinkware.com For Frequently Asked Questions, visit: http://www.thinkware.