Installation Guide

9
English
Turning the Device Power On/O
Once connected to the vehicle, the device will automatically turn on and
o with vehicle ignition.
Upgrading Firmware
The dash cam will automatically be updated if the microSD card contains
the upgraded rmware le.
Ensure your device is up to date with the latest rmware. Check the
THINKWARE website (www.thinkware.com) for latest rmware upgrades.
Do NOT disconnect your device from power while it is being updated.
This will result in damage to the dash cam.
0,&
Power cable for vehicle
Preventing Vehicle Battery Discharge
Depending on the brand and model of your car, the power may be
supplied to the dash cam even with the ignition turned o.
This can result in vehicle battery discharge.
Some vehicles with multiple power sockets might be equipped with at
least 1 outlet that does not shut o the power with the ignition.
Test each power outlet to ensure you connect to an outlet that shut o
with vehicle ignition.