User Guide
Table Of Contents
- Note Regarding RF Exposure.
- FCC Notice and Cautions
- Compliance FCC Part 90
- Acceptable Frequencies
- Migrating from Thinkify HSP2_0 to HSP3_0 firmware
- Ethernet Communication between HOST and THINKIFY HSP3.0
- Output and Status Messaging in the Thinkify HSP3.0 system
- IO and Timing control in the Thinkify HSP3.0 System
- System Type Functions and control in the Thinkify HSP3.0 system
- Using the LOCK function in Thinkify HSP3.0
- Controlling the programming list database in the Thinkify HSP 3.0 system
In most cases the user can just use the default settings for the inventory process. There
are two aspects of this that can be controlled for fine tuning a system if desired. These
include controlling the SELECT used and allowing an ACCESS operation to occur. Only
fairly non-standard use cases would use these
TODOTODO - add details of these - TODOTODO for now just use the defaults
In general the default INVENTORY used consists of the RF operations
SELECT ALL,
QUERY, with Q of 0,
ACK,
REQRN
to bring the tag to OPEN/SECURE. See Gen2 spec for description of these and the
inventory process.
Copyright 2014 Thinkify LLC. All Rights Reserved.
Thinkify, LLC, 18450 Technology Drive, Suite E1, Morgan Hill, Ca. 95037, www.thinkifyit.com 408-782-7111