User Guide
Table Of Contents
- Note Regarding RF Exposure.
- FCC Notice and Cautions
- Compliance FCC Part 90
- Acceptable Frequencies
- Migrating from Thinkify HSP2_0 to HSP3_0 firmware
- Ethernet Communication between HOST and THINKIFY HSP3.0
- Output and Status Messaging in the Thinkify HSP3.0 system
- IO and Timing control in the Thinkify HSP3.0 System
- System Type Functions and control in the Thinkify HSP3.0 system
- Using the LOCK function in Thinkify HSP3.0
- Controlling the programming list database in the Thinkify HSP 3.0 system
In the final status message the fields are
ALL: - this is the code for the overall success/fail of all enabled actions the entire loop
OPN: - this is the success/fail of the OPEN sequence to bring the tag to OPEN/SECURE
TID: - success/fail of the read of the TID memory area
EPC: - success/fail of the write to the EPC memory area
KIL: - success/fail of the write to the KILL password memory area
ACC: - success/fail of the wrie to the ACCESS password memory area
USR - success/fail of the write to the USER memory area
PCW: - success/fail of the write to the PC word
LCK: - success/fail of the LOCK operation
The bytewide codes for each field are similar in function to the HSP2.0 system but have
different values to avoid confusion between the two systems
0x00 - SUCCESS
0x90 - indeterminate - no valid response was processed for this operation
0x9F - action for this field was not enabled
0x9E - action for this field was enabled but not executed (probably due to previous error)
0xCe - the action was performed but the tag returned an ERROR response e
Copyright 2014 Thinkify LLC. All Rights Reserved.
Thinkify, LLC, 18450 Technology Drive, Suite E1, Morgan Hill, Ca. 95037, www.thinkifyit.com 408-782-7111