User Manual

Installation
What you need to get started

1 power cord (included)

1 Ethernet cord (included)
INSTRUCTIONS
1. Determine your gateway’s Ethernet Mac address

Look on the bottom of your gateway for the Ethernet MAC address and write it down.
2. Plug in modlet gateway

Plug in the modlet gateway into an electrical outlet using the power cord provided. The green power
LED light should turn on.

Then plug the gateway into your home or office router using the Ethernet cord provided. The WAN
interface LED will be flashing and then become solid when connected.
3. Register a modlet account

Go to https://mymodlet.com and select the link that says “New User? Create an Account”.

Follow all on screen instructions to register an account.

On the last screen, click the “I have a Gateway” button.

Enter the Ethernet MAC ID for your Gateway (From step 1)

If prompted enter “admin” for the username and “admin” for the password
4. Set up your modlet(s)

Follow all on screen instructions to set up your modlet(s).