R User Guide
Hardware Top View Bottom View Wall mounts Front View Error LED Power LED USB interface LEDs Run LED WAN interface LED ZigBee interface LED Back View AC/DC power supply 2 USB 2.
LED light overview Power LED: ON when AC/DC power supply is connected and modlet® gateway is powered ON. OFF when AC/DC power supply is not connected. To power on the modlet® gateway please verify the AC/DC adapter is properly connected. Run LED: OFF when the modlet® gateway is in IDLE mode Flashing when the modlet® gateway is in OPERATIVE mode Error LED: ON when the modlet® gateway is in ERROR mode. To restart the modlet® gateway press Reset Button on the back.
Installation What you need to get started • 1 power cord (included) • 1 Ethernet cord (included) • IP address of your home/office router (user provides) To find your router’s IP address consult your router’s manual or contact the manufacturer my router IP address: INSTRUCTIONS 1. Plug in modlet gateway • Plug in the modlet gateway into an electrical outlet using the power cord provided. The green power LED light should turn on.
Troubleshooting If you are connected to the internet and logged into your account, but you’re not seeing the latest data, try these tips. 1.
Modlet® gateway PACKING LIST • 1 modlet gateway TE1210 • 1 Cable Ethernet, 6FT min • 1 AC/DC Power supply, 110V/240V Input, 12V/1A output ThinkEco modlet® gateway Thank you for purchasing your new modlet® gateway! For more information and to learn about your modlet® gateway please visit www.themodlet.com.
more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the distance between the equipment and the receiver. 3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help.
148 Madison Avenue, 8th Floor New York, NY 10016 www.thinkeco.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
