User's Manual

User’s Manual Max Hand Held Terminal




 Changing menu cards

The menu card changing process may only be carried out in a dry and clean environment.
Switch the ORDERMAN

Max off and carefully loosen both screws on the underside of the
device.
You can now remove the locking part and then remove the menu card from the ORDER-
MAN

Max.
Push the new menu card straight until it fits into the handset. Then screw the locking part
carefully back on with the two screws. After switching on the device and identification of the
menu card, operation can recommence.
Carry out touch calibration after each menu card change.
For optimal legibility only use menu card transparencies that have been specifically
designed for the device. Do not use paper or other materials, because possible resi-
due in the device is
difficult to clean.
