Manualshelf

Spec Sheet

ManualsBrandsThingMagic ManualsRFID EquipmentUSB Pro RFID Reader
12
A D I V I S I O N O F T R I M B L E
USBPro RFID Reader
World-class UHF RFID Desktop Reader
The ThingMagic USBPro RFID Reader allows solutions developers to support
applications that require desktop reading and writing of EPC Global Gen2 tags
as well as other protocols such as ISO18000-6B, IPx and AEI ATA through
additional license. Based on ThingMagic’s best-in-class M6e-Micro LTE UHF
RFID module, the USBPro RFID Reader is controlled and powered by a host PC
or laptop through a USB interface, and, in addition, supports autonomous
operation. The ThingMagic USBPro RFID Reader is compatible
with
ThingMagic’s application development tools, including Universal Reader
Assistant,
permitting rapid creation of solutions to support a wide range of
applications, including tag commissioning, manufacturing WIP, document
tracking, retail POS, and workflows for healthcare, events, and hospitality.
Physical
Dimensions
(
no
t
including
s
t
and)
97 mm L x 61 mm W x 25 mm H
(3.8 in L x 2.4 in W x 1.0 in H)
Regulatory & Safety
R
e
gulatory
FCC 47 CFR Ch. 1 Part 15,
Industrie Canada RSS-21 0,
ETSI EN 302 208 V1.4.1
Safety
IEC 60950-1 (ed.2)
US-17650-UL
Power
DC Power
Required
DC Voltage: 4.5 to 5.5 VDC from USB cable
DC Power: 6.2 W max
Supplied interface cable terminates in two
type-A plugs: one for power and signal,
the second for additional power if needed
Idle Power
Consumption
0.35 W max at idle
(Power management modes can be used to
reduce this to as little as 0.1 W)
Environment
OperatingTemp.
-40C to +60C*
StorageTemp.
-40C to +85C
Architecture
User Memory
16 kB
Tag Buffer
200 tags
Performance
Tag Read Rate
50 tags/second
Tag Read
Distance
Up to 4 feet (1.2m) depending on tag
sensitivity and orientation with internal
antenna. Up to 20 feet (6.1m) with external
6dBi linearly polarized wideband antenna.
R
e
ader
USB-6EP
De
v
elopmen
t
Kit
USB-6EP-DEVKIT
RFID Protocol
Support
EPC Gen2V2 ISO18000-63 standard
ISO18000-6B, IPx, AEI ATA are available
through additional license
Antenna Ports
Internal antenna with an average gain of
+1 dBi from 865-869MHz and 902-928MHz,
External RP-SMA antenna connector
RF
P
ow
er
Output
Separate read and write levels (into the
antenna) are command-adjustable from
-5 dBm to 30 dBm* (1W), +/- 1.0 dBm
accuracy with +20dBm default
F
r
equenc
y
Pre-configured for the following regions:
FCC 902-928,917.4-927,917.5-922.5 MHz
(Americas)
ETSI 865.6-867.6 MHz, 869.85 MHz (EU)
TRAI 865-867 MHz (India)
KCC 917-920.8 MHz (Korea)
ACMA 920-926 MHz (Australia)
SRRC-MII 920-925 MHz (P. R. China)
MIC 916.7-920.9 MHz (Japan)
Open (Customizable) 865-869 and 902-928
MHz
Data/Control Interface
Ph
y
sic
al
USB Micro-B connector, with removable
six (6) foot cable with dual USB-A type plug
Signaling
USB 2.0
I/
O
Two I/O command controlled LEDs
and two I/O command queried switches
Pro
t
oc
ol
Command-response protocol protected by
length field and 16-bit CRC
*Duty cycle restrictions based on temperature,
tx power >23dBm

Summary of content (2 pages)