Manual

Controlling the Reader
M6 and Astra-EX User Guide 45
Query Page
Use the M6 and Astra-EX Query Page to set up and run Anti-Collision Searches quickly,
and to obtain immediate feedback. This is useful for debugging as well as for verifying
performance after installation is completed.
If the Query page does not load and you do not see the Java logo, install the Java
Runtime Environment for your platform and restart your PC.
Note
Use of the Query applet, or any Reader client application, requires port 5084 to be
open on the network. If the Query applet Connect fails to connect it is likely either
another client already has an open connection or port 5084 is being blocked by a
firewall.
The basic steps to connect, read, modify the read behavior and display options are
defined in the following sections:
Read Tags
Query Results
Query Settings
In addition to modifying the query behavior using the Query Settings, the performance of
the reader can be optimized for a particular usecase by making changes to the Gen2
Protocol Settings.
Read Tags
To read tags under default performance and display options:
1. Click ʻConnectʼ to reader. A connection will not be successful if other clients are
connected to the reader.
Figure 14: Query Page - Connect
2. Position one or more tags, in front of one of the antennas connected to the
Reader.
3. Click ʻReadʼ.