Triplex User Manual

INSTALLATION

Connection - Electrical

The appliance is supplied with a power cord and plug which must be connected to a double

pole switched mains supply, with 3mm minimum contact separation at all poles.

Any excess power cord MUST be routed away from the appliance and not come into contact

with the appliance or hang loose into a lower compartment.

When satisfied with the appliance, please instruct the user on the correct method of operation.

If the appliance fails to operate correctly after all checks have been made, refer to the

authorised service provider in your area.

IMPORTANT

• This appliance must be earthed

• If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or a similarly qualified person in order to avoid a hazard

• After installation the appliance MUST be tested for soundness

• Test ALL burners on high and low flame for flame stability.

• The gas supply input pressure MUST not rise or fall significantly from nominal when

ALL appliances connected to the supply are operated simultaneously.