User Manual

8
Fig. 5 – Air Gap and Gas Dispersal Hole
A = 58mm Air gap beneath hob pressing.
B = Gas dispersal hole. Min Ø 12mm, max Ø 25mm, with baffle & grille, venting to outside.
Fig. 6 – Control Positions
OFF FULL RATE LOW RATE
Fig. 7 – Minimum and Maximum Pan Sizes
• The minimum permitted pan sizes are Ø100mm for the auxiliary burner, Ø120mm for the
semi-rapid burner and Ø150mm for the rapid burner.
• The maximum recommended pan sizes are as shown below.
• Avoid old or misshapen pans as these may reduce efficiency and can cause instability.
• Using larger than recommended pan sizes may reduce performance or cause damage.