User Manual

7
Fig. 3 - SURFACE MOUNT FIXING – SHB & SCU 353 SERIES EDGE DETAIL
Fix the hob centrally in the cut-out to maintain a 2-3mm air gap to the worktop.
1
Surface mounting bezel
2
Pressing
3
Glass Lid
4
Screw fixing cap
5
Bump Stop
6
Wood Screw
7
Worktop
Fig. 4 – MINIMUM DISTANCE TO COMBUSTIBLE MATERIALS
For SHB353 & SCU353 Series, the minimum permitted distances to combustible
materials are as shown below.
A= 200mm minimum unless protected by a non-combustible heat barrier.
B = 500mm minimum from burner ports to fitment above appliance.