Owner Manual

Installation / Owner’s Manual 6
LED Control Panel:
The control display panel is located between the freezer door and the fresh food door (See Art02450).
On/Off switch .....................................................................................30
Selector switch ................................................................................. 207
Conrmation button......................................................................... 307
Mode indicator ................................................................................ 276
Cooling level indicators ................................................................... 308
Moisture reduction symbol .............................................................. 306
Turning the refrigerator on:
- Press and hold the On/Off switch [30] for one (1) second.
- Part of the On/Off switch appears green.
- The current mode indicator [276] and the cooling level indicator [308] illuminate and will dim after ten (10) seconds.
- The light in the On/Off switch will remain on.
To check the operating mode and the cooling level at any time, briey press the On/Off switch. The mode indicator
and the cooling level indicator illuminate for ten (10) seconds.
Selecting the operating mode:
- Turn the refrigerator on.
- Press and hold the conrmation button [307] for two (2) seconds.
- The mode indicator will start to ash.
- Press either of the selector switches [207] until the desired mode indicator illuminates.
- Press the conrmation button [307] to start operation in the desired mode.
A
Auto Mode
230VAC
12VDC
Gas
The refrigerator control automatically selects the power source. The control selects AC
electric rst. If AC electric is not available, the control selects DC electric. If DC electirc is
not available, the control selects LP gas.
The refrigerator operates on AC electric.
The refrigerator operates on DC electric.
The refrigerator operates on LP gas.
Operating the Refrigerator Controls
NOTICE
30
276
307
308
306
207