Owner Manual
Installation /Owner’s Manual 7
Selecting the cooling level:
- Press and hold the conrmation button for two (2) seconds.
- The cooling level indicator [308] will start to ash.
- Press the conrmation button again so that the cooling level indicators start to ash.
- Press either of the selector switches until the desired cooling level is illuminated.
- Press the conrmation button to set the cooling level.
minimum cooling level maximum cooling level
If the cooling load changes, you must manually change the thermostat to maintain the same temperature inside the
refrigerator.
When the outside air temperature is below 10° C, the refrigerator may have a tendency to freeze food at the colder temperature
settings. To reduce the tendency to freeze food:
- Set the refrigerator controls to a lower cooling level.
- Keep the refrigerator full.
- Put foods that are more likely to freeze on the lower shelf.
NOTICE