Installation Manual

Installation Manual 6

1. Fasten the refrigerator into the enclosure. (See Art 02736):

- Push the refrigerator fully into the enclosure opening.

- Install shims between enclosure wall and refrigerator to prevent excessive bowing of refrigerator cabinet walls when installing

mounting screws.

- Install 6 provided mounting screws, 3 on each side.

- Install hole plugs to cover screw holes.

Install the Refrigerator

ART 02736

121

Safety Strap Mounting (optional):

- One of the screws [1] fastening the control bracket may be removed and reinstalled to fasten the strap or cable. (See Art02757)

- Alternatively, a screw may be driven into the breaker in the specified 76 mm (3.0 inch) by 38 mm (1.5 inch) area shown.

- Any strap or cable should be routed away from the wiring on the top of the refrigerator.

ART 02757