Configuration Guide User Manual

3. Web Viewer Settings
This is a very simple window. You can select the
update interval for the Web Viewer and a title for the
window that will show in the Browser.
4. Settings for Sending Current Readings
In this window you can elect to send Current Readings
from the unit, how often they are sent and by what
means. Here we are sending the readings every 5
minutes via FTP to TandD’s free WebStorage Service,
although you can select any FTP server. You can also
elect to send Current Readings by E-Mail, although this
may result in a lot of E-Mails. Note that if you are
sending Current Readings to TandD’s free WebStorage
Service via FTP, the Destination Folder must be left
blank.
If you want to keep your data within the confines of
your own network, and you don’t have access to an
existing in-house FTP server, there are alternatives.
Most routers today have an FTP function to an attached
USB drive. Also there is free software available from
companies like Filezilla or zFTPServer that can turn
any PC into an FTP server (it will need a fixed IP
address however).