Configuration Guide User Manual

Starting the TR-700W Settings Utility
I) Getting Started
1. After installing TR-700W for Windows on your PC go to the Start Menu and launch the TR-700W Settings Utility. If you
have questions about installing the software or the USB Driver open TR-700W for Windows and then select Help for Unit
Recognition Failure. The Guide has very complete instructions for this.
2. Next connect the TR-700NW/AW to your PC using the USB cable supplied with the unit. (Hint: The USB port is on the
bottom of the logger.) If the USB driver installed correctly the software should automatically discover the 700W. You will
see a “USB Communication in Progress” notification and the device will appear in the Utility Main Window. If this doesn’t
happen automatically you may have to manually associate the USB Driver with the 700W in your PC’s Device Manager.