Owner manual

Setup
Note: The RFC1000 can transmit up to 400’ outdoors and 150’ indoors.
RFC1000-Repeaters act as repeaters and may be plugged into wall outlets to transmit data
over greater distances.
Therm•A•Lert Series
Identify a location for the RFC1000 base station
3
Plug the RFC1000 into the USB port on the base station computer
AC Powered
Install the ThermoWorks software, USB Drivers and MadgeNET
®
Software
1
Please ensure the ThermoWorks software and MadgeNET
®
are running.
2