User guide

CAUTION: The block vent cover may be very hot due to the fan blowing
upward. Please use caution.
5.3.2 Probe Sleeves and Tongs
The calibrator is supplied with a multi-hole aluminum-bronze probe sleeve for
insertion into the calibrator well and tongs for removing sleeves. Probe sleeves
of various hole sizes are available to allow the user’s probe to fit snugly into the
well whatever the diameter of the probe.
One insert, whichever is ordered, is shipped with the unit:
•
Insert A (variety block): 1/2", 3/8",3/16"”,1/8", and 1/16"holes
•
Insert B (comparison block): two 3/8", two 1/4", and two 3/16" holes
•
Insert C (1/4” comparison block): six 1/4" holes
or
•
Insert D (metric block): two 3 mm, two 4 mm, and two 6 mm holes
9141 Dry-well Calibrator
User’s Guide
18