User guide

5 Parts and Controls
The user should become familiar with the dry-well calibrator and its parts.
5.1 Bottom Panel
Figure 2 on page 15.
Power Cord - Underneath the calibrator is the removable power cord inlet that
plugs into an IEC grounded socket.
Power Switch - The power switch is located on the power entry module
(PEM). The PEM also houses the fuses and the dual voltage selector. The PEM
and Heater Voltage Switch (see below) allow the unit to be field switchable for
115 VAC (±10%) or 230 VAC (±10%) operation.
15
5 Parts and Controls
Bottom Panel
Figure 2 9141 Back Panel and Bottom