Software Manual Instruction Manual

The trim operation can be password protected. To set a password the user

must have administrator privileges for the computer.

ADVANCED SETTINGS TAB - DTR

OPERATION OF THE PROBE BUTTON

PRINTING DELAY TIME FOR REMOTE PROBE BUTTON

To increase or decrease the printing delay time for prints taken with the remote

button (on the probe handle) click the '+' or '-' boxes respectively. The boxes

are located next to 'Printing delay in seconds' text in the 'Operation of the probe

button' section. The minimum value is 0 seconds (printing starts immediately)

and the maximum value is 30 seconds (default = 10 seconds).