Manual

BlueTherm

Probe - Care and Use Guide

Silicone Rubber Boot

Super-Fast

Probe Tip

(572°F Max Temp)

Probe Shaft

(572°F Max Temp)

Probe Handle

(122°F Max Temp)

Send/Transmit

and Power Button

LED Indicator

End Cap

Protective Cover

Reset Button

USB Charging Port

Charging Connection and Reset Button.

PROTECTIVE COVER

SHOULD BE SECURELY IN PLACE

BEFORE USE.

PAGE 1
BlueTherm® Probe - Care and Use Guide Send/Transmit and Power Button End Cap Probe Shaft (572°F Max Temp) LED Indicator Probe Handle (122°F Max Temp) Super-Fast® Probe Tip (572°F Max Temp) Protective Cover USB Charging Port Reset Button Charging Connection and Reset Button. PROTECTIVE COVER SHOULD BE SECURELY IN PLACE BEFORE USE.
PAGE 2
The BlueTherm Probe is a precision thermocouple thermometer and with proper care will last for years of use. Please follow the guidelines below: • BlueTherm is NOT waterproof and should not be submersed in liquid. Use a sanitizing wipe to clean all parts of the probe. • Make sure that the protective rubber cover is securely in place over the charging port before use. Failure to secure the cover will allow liquid ingress through the USB connector, which will cause the unit to fail.