Installation Guide

THERMOFILM® – The complete underfloor heating solution for all wood & laminate floors.
Thermosoft International Corporation Installation Manual: ThermoFilm®
Page 6
This THERMOFILM underfloor heating element shall be installed only by qualified personnel who are
familiar with the construction and operation of the product and the risks involved.
The installation of this heating product shall be in accordance with the manufacturer’s instructions and the
regulations of the authority having jurisdiction.
Attention!
The installation shall be made in accordance with Article 424, Part J, of the NEC, NFPA 70. By following
these simple instructions, you will be able to install the THERMOFILM underfloor heating system without
any difficulties. The final connection to the power supply MUST be carried out by a qualified electrician.
NEVER turn the heater on when is in the roll or layers touch each other. It will destroy the unit, void the
Manufacturer’s Warranty and may cause fire hazard.
INSTALL ALMOST ANYWHERE
THERMOFILM can be installed on top of plywood or solid concrete floors enabling installation in many dry
room types. THERMOFILM can also be installed under many floor coverings including: laminate,
engineered wood and solid wood floors.
MAINTENANCE FREE, SAFE, OVERALL WARMTH
Safe, under laminate and wood floors, THERMOFILM’s radiant heat provides overall warmth and comfort
without blowing dust or allergens like typical convection heating systems. The large heated area also
provides an even heat distribution. Once installed, it is completely maintenance free.
HOW EFFECTIVE IS UNDER LAMINATE HEATING?
THERMOFILM is a highly effective direct acting radiant heating system. It can be used as a substitute to
traditional convector radiators by providing primary heating or used to warm a cool floor & provide
background heat. If you are using your THERMOFILM as a primary or “sole” heat source, make sure that
the Watts installed meet your BTU requirements. 1 Watt=3.412 BTU’s.