Use and Care Manual

Image for reference only. Actual product may vary.
Hard Spout Lid with Twist Drink Spout Cover:
1. Remove lid (A) by twisting counterclockwise.
2. Unlock the drinking spout cover (B) by twisting spout cover counterclockwise until the cover
fully stops twisting (about 1/4 turn). Pull up on spout cover to open and expose drinking spout
(C).
3. Pull out O-ring gasket (A1) from underside of lid (A) and spout cover gasket (B1) from underside
of spout cover (B).
4. Wash all parts separately and re-assemble.
a. Ensure gaskets are properly seated to minimize leaking.
5. Fill container with contents. Do not overfill: Leave space for lid (A) to avoid overflow.
6. Replace the lid (A) by twisting it clockwise.
7. To drink, unlock the drinking spout cover (B) by twisting spout cover counterclockwise until
the spout cover fully stops twisting (about 1/4 turn). Pull up on spout cover to open and
expose drinking spout (C).
8. When finished drinking, close and lock the spout cover (B) by twisting spout cover clockwise
until the spout cover fully stops twisting (about 1/4 turn).
Image for reference only. Actual product may vary.
Flip-Up Straw Lid (If Present):
1. Remove lid (A) by twisting counterclockwise.
2. Pull on the straw tab (B1) on the sipper straw (B) to open.
3. Pull the straw stem (D) out of bottom of the lid (A).
4. Pull out O-ring gasket (A1) from underside of lid (A).