Data Sheet

ManualsBrandsTHERMOREX ManualsSwitches & ButtonsBi-metallic switch 250 V 16 A Opening temp. ± 5°C 180 °C

Contact Type: Normally Closed

T K32

Operating Temperature Range (+30 C to + 250 C)

This is a temperature sensitive device, which is intended to keep a

temperature below one particular value during normal operating

conditions, automatically switching off the electrical circuit. This

device is not self-resetting and operates with manual reset option.

It prevents overheating in variety of consumer, industrial and

commercial products.

This temperature limiter is available only with contacts that open

as the temperature increases. The contacts may be reset by

manually pushing on the reset button after the device has cooled

below the open temperature calibration.

Besides its variety of standard configurations this limiter can

also be customized to the specific technical needs of the customer,

assuring maximum design flexibility and usage in broad range of

temperature control applications.

Disc Temperature Limiter

Summary of content (6 pages)

PAGE 1
T K32 Disc Temperature Limiter Operating Temperature Range (+30 C to + 250 C) This is a temperature sensitive device, which is intended to keep a temperature below one particular value during normal operating conditions, automatically switching off the electrical circuit. This device is not self-resetting and operates with manual reset option. It prevents overheating in variety of consumer, industrial and commercial products.
PAGE 2
BASIC TECHNICAL DATA FOR TK32 (30 C _ 170 C) Parameter Value Rated voltage, V, not more ~250 Rated current, A, at power coeff. 0,95, not more 16 Rated current, A, at power coeff. 0,6, not more 10 Number of automatic cycles, at rated current 16 А and power coeff.
PAGE 3
Table 1.1 (TERMINALS) 6.3 T 02 6.3 T 01 1.6 0.8 14.5 27 14.5 T 04 6.3 30 0.5 T 03 0.8 14 10.7 35 1.6 0.8 3 5 7.5 5 14.5 14.5 T 06 5 4 3 0.5 T 05 4.5 3.2 0.5 4 26.3 14.5 14.5 T 08 9.9 4.8 T 07 3.2 25 0.8 0.5 11.7 14.5 T 09 14.5 T 10 4.8 8.5 0.5 1.6 31 0.8 1.5 2 2.7 3 14.5 14.5 T 12 4.8 4.8 T 11 2.1 23 0.8 0.8 9 14 T 13 14.5 14.5 T 14 Wire standard length: 150 mm 8.5 14.
PAGE 4
Table 1.2 (MOUNTING) MG 01 14.5 NO MOUNTING 18.2 0.2 MG 00 ROTATION OR FIXED CLIP 3.8 15.8 23.8 0.1 0.5 MG 02 20.4 CAP-FLANGE 14.5 3.8 23.8±0.1 5 30.4 0.2 MG 03 14.5 3.8 ROTATION CLIP 15.8 30.4 35.5 0.1 4.02 13 14.5 8 18.2 0.4 CLIP WITH ONE FIXING HOLE 0.5 1.9 MG 04 25.2 4 42.25 0.2 3.8 MG 05 14.5 TUBE MOUNTING 15.8 MG 06 16 L SCREW CAP ROUND 14.
PAGE 5
Table 1.3 (BODY and/or CASE) B1PR 14.5 PLASTIC BODY 20 B1P 7.2 5 16 Protection cap with rubber button B1CR 14.5 CERAMIC BODY 20 B1C 7.2 5 16 Protection cap with rubber button B2PR 23 14.5 PLASTIC BODY 16 10.2 5 B2P Protection cap with rubber button B2CR 23 14.5 CERAMIC BODY 16 10.2 5 B2C Protection cap with rubber button B3CR 14 16 Protection cap with rubber button B4S 2 10.7 14.5 14.5 23 CERAMIC BODY 6.2 B3C 20 15 SILICONE CASING 19.
PAGE 6
Address: “Thermorex” SAS, 18, rue Pasquier, 75008 Paris, France tel.: +31(0) 61 55 22 880, e-mail: info@thermorex.fr, marketing@thermorex.fr Manufacturing plant: “Thermorex” CJSC, 24/41 Fuchik str., 0048, Yerevan, Armenia tel.: +37410 39 58 84, 37410 34 93 51, fax: +37410 34 98 86, e-mail: info@thermorex.org, marketing@thermorex.