Instruction Manual

Technical Specification Installation and Operation Handbook
C-2 2416 Controller
Alarms
Number of alarms Four
Alarm types Absolute high or low. Deviation band, deviation high, deviation
low. Rate of change
Alarm modes Latching or non-latching. Blocking. Energised or de-energised in
alarm
Setpoint programming
Number of programs One or four
Segments per
program
16
Event outputs Up to two
Communications (all modules are isolated)
Modbus ®
RS232,2-wire,RS 485 and 4 wire RS485 modules
Baud rate 1200, 2400, 4800, 9600 and 19,200 baud
PDSIO
Slave input (isolated) Remote setpoint input with holdback to master
Master output Isolated from main PV. Retransmission of setpoint, process value
or output
General
Display Dual, 4 digit x 7 segment LED. Up to two decimal places
Supply 85 to 264Vac, 48 to 62 Hz, 10 W max OR
24Vdc or ac -15%, +20%. 10W max
Operating ambient 0 to 55
o
C and 5 to 90% RH non-condensing
Storage temperature -10 to +70
o
C
Panel sealing IP65
Dimensions 48mm wide x 48mm high x 150mm deep
Weight 250g
EMC standards EN50081-2 & EN 50082-2 generic standards for industrial
environments
Safety standards Meets EN61010, installation category II (voltage transients must not
exceed 2.5kV), pollution degree 2
Atmospheres Not suitable for use above 2000m or in explosive or corrosive
atmospheres. Electrically conductive pollution must be excluded
from the cabinet in which this controller is mounted